| Model | AVI-IC-A025C | ||||
| CCD resolution（μm/pixel) | 2.5 (front), 5 (back) (16K color high-precision CCD | ||||
| External dimensions（mm） | 1790×2250×1990（L×W×H） | ||||
| Equipment weigh（t t） | 3 | ||||
| Equipment powe（r Vac,Hz,KW） | 380，50，16 | ||||
| Processing method | Full-automatic double-sided scanning, NG slot, slot to be inspected | ||||
| Inspection area(mm) | 30×50（MIN） | 120×300（MAX） | |||
| CT（pnl/h） | Plate width＜40 mm（Once scan）：270 40 mm≤Plate width＜80 mm（Twice Scan ）：200 80 mm≤Plate width＜120 mm（Triple scan）：140 （Double-sided inspection） | ||||
| Reference material format | Gerber （RS274X)、ODB++ | ||||
| Detection board thickness(mm) | 0.06 - 2 | ||||
| Defect confirmation | VRS off-line decision | ||||
| Defect range | Copper surface area covered by gold surface/organic flux: Scratches, pinholes, gold particles, metal bumps, dents, discolorations, copper leakage, contamination, nicks, insufficient etching, excessive etching, foreign matters, non-gold plating, circular PAD diameter out-of-tolerance Anti-welding zone: Scratch, lack of anti-welding (exposed gold/exposed copper/exposed base material), through hole (exposed gold/exposed copper), foreign matter, green paint peeling, green paint offset, pollution, green paint crack, small hole plugging Base material area: Copper residue, scratch and bottom leakage Line area: Notch, open circuit, short circuit, scratch, exposed copper, pinhole, gold particle, metal bump, discoloration, oxidation, pollution, foreign matter, insufficient etching, excessive etching Line area under green paint: Notch, open circuit, short circuit, scratch, foreign matter | ||||
| Detection material | Type of substrate: PBGA、CSP、 RF、 COB、 OSP、BOC、MMG、WBGA、PSAP、MCM-BGA、FCBGA、uBGATM | ||||
| Temperature and humidity | 22±2℃ ， 50±10% | ||||
